SEMITECH
02·GMATT

Matting Agent for Industrial Coatings.

New Grade Available BET 230 – 270 m²/g, oil absorption 300 – 380 g/100g, particle size 8 – 11 µm. Direct alternative to Evonik ACEMATT TS 100 at 30 – 45% lower landed cost from MINMETALS EAST China.

Pair with SEMITI TiO2 for industrial coatings

Industrial Technical FAQ

Solutions for heavy-duty protection and anti-corrosive formulations.

+Why use untreated silica for multi-layer industrial coatings?

In high-performance industrial systems, wax-treated silica can migrate to the surface and cause inter-coat peeling. Our untreated silica matting agent (GMATT 100 Series) ensures maximum inter-coat adhesion, allowing subsequent layers to bond perfectly to the primer or intermediate coat.

+How to prevent zinc dust from settling in anti-corrosive primers?

Zinc dust is extremely heavy. Incorporating our fumed silica anti-settling agent (SEMISIL Series) builds a 3D thixotropic network. This structure holds heavy particles in place during storage but breaks down under shear for easy spray application, preventing “hard-packing” at the bottom of the drum.

+Does the matting agent affect the corrosion resistance (Salt Spray test)?

No. SEMITECH synthetic silica is high-purity and chemically inert. When formulated as a silica flatting agent, it does not create pathways for moisture or electrolytes, ensuring the final film maintains its full anti-corrosive performance according to ISO 12944 standards.

+Is there a low-foam silica solution for waterborne industrial paint?

Yes. Our specialized WB Series provides excellent dispersibility in water. It is surface-modified to wet out instantly, reducing the need for high-shear mixing that typically generates micro-foam, which can lead to pinholes in industrial finishes.

+Which grade is best for 85° sheen control in heavy machinery paint?

For precision “flatting” or low-sheen finishes, we recommend the GMATT 100 or 200 Series. These grades provide consistent gloss reduction at both 60° and 85° angles, ensuring a uniform matte appearance on large surfaces like earth-moving equipment or trailers.

Recommended Industrial Solution

For maximum adhesion and suspension in protective coatings, we recommend pairing the GMATT 100 Series with SEMISIL Hydrophilic Fumed Silica.

Explore Silica Products

SEMITECH matrix · co-purchase

05 / Inquiry

Talk to a chemist about Matting Agent for Industrial Coatings.

Submit your formulation and target gloss specs. A SEMITECH engineer will recommend the grade and ship a lab sample.

Reply
24hrs
Sample
5days
Supply
15kMT/yr

Your information is used only to respond to your inquiry and will not be shared.

TelegramWhatsApp