Recommended Formulation Window
| Parameter | Range |
|---|---|
| Treat rate | 2.5 – 6.0 wt% |
| Gloss target window | 60° gloss 10 – 35 GU (satin to dead matt) |
| Particle size (d₅₀) | 8.0 – 11.0 µm |
| BET | 230 – 270 m²/g |
| Oil absorption | 300 – 380 g/100 g |
Why SEMISIL H100 Fits Wood Coatings
High transparency preserves wood grain visibility under NC, PU, AC, and waterborne topcoats. No optical haze.
Competitive context: ACEMATT TS 100, OK 412, SYLOID C812 are typical. SEMISIL H100 matches the relevant performance window with the same particle size range as the legacy grades, enabling clean reformulation paths.
Cross-References on This Site
FAQ — Wood Coatings
+What treat rate of SEMISIL H100 is recommended for wood coatings?
Typical dosage is 2.5 – 6.0 wt%. Fine-tune ±0.5 wt% based on your DFT and target gloss (60° gloss 10 – 35 GU (satin to dead matt)).
+How does SEMISIL H100 compare to ACEMATT TS 100, OK 412, SYLOID C812 are typical for this application?
ACEMATT TS 100, OK 412, SYLOID C812 are typical. SEMISIL H100 matches their performance window at 30 – 45% lower landed cost from Chinese manufacture, with the same particle size range so existing formulations port cleanly.
+Can I request samples for wood coatings trials?
Yes — 5 kg evaluation pack ships within 5 business days FCA Shanghai. Use the form below or jump to the SEMISIL H100 main grade page.